A General Theory of Channel Adjustment in High Gradient Streams
The paper presents a theory of channel adjustment in high gradient streams. This theory states that given sufficient energy, stream channels will adjust their dimensions and flow hydraulics...

A Mechanism of Pool Formation and Maintenance in Forest Streams
Laboratory and field investigations illustrate a hydraulic mechanism responsible for the formation and maintenance of pools associated with large, in-channel obstructions in forest streams....

Estimating Local Bed Shear Stress in Large Gravel-Bed Rivers
The local bed shear stress ?o1 cannot be directly measured and is typically estimated using flow observations in various theoretical or empirical...

Coarse Sediment Transport and the Maintenance of Fish Habitat in the Upper Colorado River
An analysis of the relation between discharge and boundary shear stress is presented for an alluvial reach of the Colorado River near Grand Junction, CO. The analysis indicates that the...

Boundary Shear in the Vicinity of River Banks
Some experimental data are presented concerning the distribution of boundary shear stresses in trapezoidal open channels for both inbank and overbank flows. The local shear stresses on...

Determination of Geometry and Stress Distribution of an Optimal Stable Channel
A numerical model which determines the geometry of a threshold channel was recently developed (Diplas and Vigilar, 1992). This is important in the design of irrigation canals, channelization...

Field Evaluation of the Sediment Transport Model Stream with a Bank Erosion Component
The graded sediment routing and stream bed evolution model STREAM of Borah, Alonso and Prasad was expanded earlier by incorporating a riverbank erosion component of Osman and Thorne. In...

Carpet Flow Analysis
Under very high flow conditions, sediment may be transported either in a suspension or by carpet flow, as defined by Bagnold. This study examines the theoretical conditions for carpet...

Stiffness of Low Rise Reinforced Concrete Shear Walls
This report, Stiffness of Low Rise Reinforced Concrete Shear Walls, was prepared by the Working Group on the Stiffness of Concrete Shear Wall...

Factors Controlling Strong Ground Motion and Their Associated Uncertainties
Of special interest in strong ground motion modeling is a quantification of the degree of influence specific physical parameters have on the computed motions. Associated with the model...

Effect of First-Story Shearwalls on Earthquake-Resistant Buildings
A Practical system for earthquake-resistant building design is described. The system utilizes Teflon sliders at the top of the first story framed shearwalls to carry a portion of the superstructure....

Damage Assessment for Reinforced Concrete Buildings with Shear Walls
This paper tries to establish the analytical method of damage assessment for R.C. buildings with shear walls before or after earthquake. Incremental nonlinear spectrum analysis, using...

Welded Wire Confinement Grids
The invention of a new way to reinforce concrete using high strength welded wire grids, (WWG) increases its earthquake resistance by improved ductility and also opens the way for vast...

Seismic Behavior of Weak-Column Strong-Beam Frames
An experimental evaluation of the seismic performance of moment-resisting steel frames using Weak-Column Strong-Beam joints is described. A simulated seismic response is imposed on five...

Fluid Viscous Damper for Improving the Earthquake Resistance of Buildings
Experimental results are presented which demonstrate that the use of fluid dampers as add-on devices in moment resisting frames substantially increases damping and reduces seismic story...

Evaluation of Seismic Isolation Schemes for a Historic Building
The U.S. Court of Appeals Ninth District building originally completed in 1905 with an expansion in 1933, suffered damage during the 1989 Loma Prieta earthquake. The building is currently...

A Shear Transfer Model for Floor-To-Wall Connections in Concrete Masonry Structures
Based upon experiments conducted at the Univ of California, San Diego (UCSD) on floor-to-wall connections in concrete masonry structures, a constitutive model was developed for the overall...

Analysis of Masonry Walls with Smeared and Discrete Crack Models
To design modern reinforced masonry structures for seismic loads and to evaluate the seismic safety of existing unreinforced masonry buildings, the shear resistance of masonry shear walls...

Behavior and Design of Angle Connections Subjected to Cyclic Axial Force and Shear
The objectives of this study were to establish cyclic behavior of double angle shear connections subjected to axial load and to develop design recommendations. Five cyclic tests of double...

Interaction Between Beam and Steel Connections
The overall objective of the investigation is to study the behavior of a particular steel connection type, flush end plate steel connections, subjected to shear, axial forces, and possibly...

 

 

 

 

Return to search